How should consumers choose a good manufacturer of Trifluoroacetaldehyde hydrate?

The production and sales of trifluoroacetaldehyde hydrate have been growing rapidly over the years. In this context, a number of manufacturers have emerged on the market. However, many of them are not competent and unqualified. They use the convenience of the Internet to mislead customers and sell them unqualified products. So, how should consumers choose a good trifluoroacetaldehyde hydrate manufacturer? Next, I'll make a detailed introduction for you, take a look at it.

08-03

2021

What should I be aware of when using trifluoroacetaldehyde hydrate?

Trifluoroacetaldehyde hydrate is also a product that is used in a wide range of applications. Most of you don't know much about it, which is of course quite normal. After all, it is not often used in life. However, there are a few things to keep in mind when using trifluoroacetaldehyde hydrate that should not be overlooked. Here I will give you a detailed introduction, if you want to know, take a look together.

07-19

2021

What are the protective measures for chlorotrifluoroethylene

Chlorotrifluoroethylene can be mixed with air to form an explosive mixture and can cause combustion and explosion when exposed to open flame and high heat. At high temperatures, the internal pressure of the container increases and there is a risk of rupture and explosion.

07-15

2021

What is the production method of poly chlorotrifluoroethylene

Polychlorotrifluoroethylene was developed and produced as a thermoplastic fluoroplastic. the first report on its preparation was published by a French company in 1937 and later, in the course of the Manhattan Project, a great deal of research work was done in the USA on its preparation process route and product properties, which was put into production by 3M in 1942 and marketed under the Kel-F trademark.

07-13

2021

What are the properties of chlorotrifluoroethylene

The room temperature mechanical properties of chlorotrifluoroethylene are better than those of PTFE, with higher compressive strength, lower cold flow, higher compressive resilience and good elastic resilience. However, as chlorotrifluoroethylene is a crystalline polymer, its mechanical properties are strongly influenced by temperature and vary somewhat depending on crystallinity and molecular weight. When moulding, transparent products with low crystallinity can be formed by sudden cooling and translucent products with high crystallinity by slow cooling.

07-12

2021

What are the differences between refrigerants and refrigerant carriers?

Many people confuse refrigerant and coolant. I will answer your question today. Refrigerant, also called refrigerant, is commonly known as snow in some areas of the south. It is a working substance that is constantly circulating in the refrigeration system, completing the cooling by changing its own state. The working substance that completes the thermal cycle in a refrigerator.

07-08

2021

What is polytrifluoroethylene and what are its main uses?

Vinyl trifluoride is prepared by homopolymerisation or copolymerisation of fluorine-containing monomers such as tetrafluoroethylene, hexafluoropropylene, vinyl trifluoride, vinylidene fluoride, vinyl fluoride, hexafluoroisobutylene, perfluoroalkyl vinyl ether and ethylene. The main types of fluoroplastics are listed below, but polytetrafluoroethylene is important in terms of quantity and use.

07-06

2021

Automotive air-conditioning refrigerant market confusion and adulteration serious

On July 3, an investigation broadcasted by CCTV's Weekly Quality Report showed that the passing rate of auto refrigerants was less than 10%. According to the survey, only 5 out of 60 kinds of refrigerants purchased in Beijing, Hangzhou and Guangzhou auto parts markets were found to be qualified, with a passing rate of less than 10%.

09-20

2018

Difference between car air conditioning refrigerant r134a and hfc-134a

As can be seen from the above, R134a and HFC134a are two different substances, but there is basically no difference in physical properties and they can be used interchangeably.

09-20

2018